Hydraulic Single Acting Cylinder

Showing all 8 results

Hydraulic Single Acting Cylinder

Hydraulic Single Acting Cylinder

ZCSLP Series

ZCSLP Series Capacity: 60-520 ton Stroke: 45-50 mm Maximum Operating Pressure: 700 bar   Single-Acting, Low Height, Lock Nut Cylinder Low height design for use in confined space. Special coating on thread piston and lock ring to prevent anti-seize over long period of time. Safety lock ring for mechanical load support even with hydraulic pressure [...]

Send inquiry

Hydraulic Single Acting Cylinder

ZCSLSG Series

ZCSLSG Series Capacity: 50-1000 ton Stroke: 50-300 mm Maximum Operating Pressure: 700 bar   Single-Acting, High Tonnage Cylinders Base mounting holes standard on all models. Single-acting, load return Hard chrome plated plunger and inner of barrel resists wear and corrosion. Plunger wiper reduces contamination, extending cylinder life. Integral stop ring provides piston blow-out protection Powder [...]

Send inquiry

Hydraulic Single Acting Cylinder

ZRSAC Series

ZRSAC Series Capacity: 20-150 ton Stroke: 50-200 mm Maximum Operating Pressure: 700 bar   Single-Acting, Aluminum Cylinders Lightweight, aluminum design for maximum portability. 7075-T6 Aluminum alloy components for maximum strength and minimum weight. Steel base plate and saddle for protection against piston rod damage. Anodizing treatment plunger, surfaces and inner of barrel resists damage and [...]

Send inquiry

Hydraulic Single Acting Cylinder

ZRSACH Series

ZRSACH Series Capacity: 20-100 ton Stroke: 50-250 mm Maximum Operating Pressure: 700 bar   Single-Acting, Hollow Plunger Aluminum Cylinders Maximum sized springs speed piston return and increase spring life. Special soft ring reduces wear caused by off-center loads. All cylinders are equipped with Lightweight, aluminum design for maximum portability. 7075-T6 Aluminum alloy components for maximum [...]

Send inquiry

Hydraulic Single Acting Cylinder

ZRSC Series

ZRSC Series Capacity: 5-100 ton Stroke: 16-362 mm Maximum Operating Pressure: 700 bar   Single-Acting, Spring return Collar thread Cylinders Equip with collar thread and base holes (on most model), for greater flexibility in mounting onto fixture.(see page 16 for details) Equip with inner plunger thread (5 ton to 30 ton) for greater flexibility in [...]

Send inquiry

Hydraulic Single Acting Cylinder

ZRSCH Series

ZRSCH Series Capacity: 13-95 ton Stroke: 8-155 mm Center Hole Diameter: 19.6-79mm Maximum Operating Pressure: 700 bar   Single-Acting, Hollow Plunger Cylinders Hollow plunger design allows for pulling and pushing application. Low profile and longer strokes fit in the tightest space. Withstands full “dead-end” loads. Collar threads for easy fixturing and all collar threads have [...]

Send inquiry

Hydraulic Single Acting Cylinder

ZRSCS Series

ZRSCS Series Capacity: 10-90 ton Stroke: 38-62 mm Maximum Operating Pressure: 700 bar   Single-Acting, Low Height Cylinders Maximum sized springs speed piston return and increase spring life. Lightweight, low profile design for use in confined spaces ,but stroke higher than ZRSSM. Grooved plunger end with threaded holes for mounting tilt saddles. Hard chrome plated [...]

Send inquiry

Hydraulic Single Acting Cylinder

ZS Series

ZS Series Capacity: 10-200 ton Stroke: 25-150 mm Maximum Operating Pressure: 700 bar   Single-Acting, General Cylinders Designed for use in all positions. Hard chrome plated plunger and inner of barrel resists wear and corrosion, it also be more closed and extending cylinder life. Maximum sized springs speed piston return and increase spring life. Special [...]

Send inquiry
This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.